Setting up Google Analytics 4 and the figures that matter

Published

Contents

Action points

  • Today, write down the four actions that bring your business customers.
  • Set the data retention in your GA4 property to 14 months.
  • Mark your quote form and your phone click as key events.
  • Send a test enquiry yourself and check that GA4 counts it.
Reading type0 min

Prefer to outsource?

Conversion optimisation →

You have GA4 on your website, see a sea of figures and wonder which ones matter. In this guide you set up Google Analytics 4 properly step by step, read the reports that count and mark the actions that bring in customers.

What Google Analytics 4 is

Google Analytics 4, GA4 for short, is Google's free analytics service that shows how visitors arrive at your website and what they do there. Every action counts as an event. GA4 is the successor to Universal Analytics, the older version that Google has replaced.

Think of an event as a page view, a click on a link or a submitted form. That way you see which steps a visitor takes before they call or make an enquiry.

Did you use Universal Analytics in the past? The standard properties of that old version have processed zero new data since 1 July 2023. From the week of 1 July 2024, access to current and historical Universal Analytics data disappeared as well.

Sound familiar? Your web developer once installed GA4, you see charts full of numbers and yet they tell you little about your enquiries. This guide helps you get that tracking in order.

Measure what brings in customers first, the rest is decoration.

Cake maker from Brabant adds the final decoration to a cake in her studio

Start with a short tracking plan

Imagine you run a landscape gardening business. What do you want to get out of GA4? Mainly how many people request a quote, how many call and which route brought them in.

How long someone looked at your photos of ponds is a side issue. So write down in advance which actions make money for your business. For most SME sites, that list stays short.

  • A visitor submits the quote form.
  • Someone fills in the contact form and submits it.
  • A visitor clicks on your phone number.
  • A customer completes an order in your online shop.

This list is your tracking plan. Everything you set up in GA4 later on, you check against these few actions.

Gardener from Brabant writes a short tracking plan on the back of a packet of grass seed

Setting up Google Analytics 4 in five steps

Has your web developer only half set up GA4? Then go through these steps calmly and tick off what is already right. Google regularly updates its screens, so a button may have a slightly different name.

Step 1. Create an account and a property

You start with an Analytics account. In Admin, click Create and choose Account. Then you add the first property, the container where your website's figures come together.

Make sure the account is in your own business's name. That way the tracking stays with you if you ever switch web developers.

Step 2. Add a web data stream

A data stream is the pipeline through which your site's figures reach GA4. For a web data stream, you enter your website's URL.

Google recommends switching on Enhanced measurement straight away. You can read what that feature measures automatically in the next section.

Step 3. Place the Google tag on every page

The Google tag is the piece of tracking code that connects your website to GA4. According to Google, you paste that tag directly after the head code on every page of your website. The head code is the invisible top section of a page.

Do you use a content management system for your site or Google Tag Manager? The latter is a free Google service where you keep all your tracking codes in one place. Google also lists those routes on the same help page. Choose one route and stick to it, so you always know where your tracking code is.

Step 4. Set the right retention period

GA4 keeps user-level data for a fixed period. In a free property, you choose 2 or 14 months. Periods of 26, 38 and 50 months apply only to event data in Analytics 360.

That choice only affects explorations and funnel reports. An exploration is an analysis you build yourself. The retention period has zero effect on your standard reports.

Want to compare this year with last year in an exploration? Then 14 months suits you best.

Step 5. Check that the data comes in

After you place the tag, it can take up to 30 minutes before GA4 collects data. Then pick up your phone, open your own site and click through a few pages. If that visit appears in GA4, the basics are working.

Owner of a music shop in Brabant clicks through his own site on his phone and checks on his laptop whether the visit comes in

Test again after every new plugin, every new form or a new theme. A regular check like that fits well with website maintenance. Once the basics are solid, server-side tracking is a later step for advanced users.

What GA4 tracks itself via Enhanced measurement

GA4 does a good part of the work itself. Switch on Enhanced measurement and the Google Analytics tag starts sending events right away, with zero changes to your code.

Dairy farmer from Brabant calmly drinks coffee while the milking robot milks a cow by itself

According to Google's help page, it covers these events.

  • GA4 counts every page view.
  • GA4 sees when someone scrolls to the bottom of a page.
  • Outbound clicks on links to other websites are counted.
  • Searches in your own site's search box are recorded.
  • GA4 measures how visitors interact with videos on your page.
  • File downloads, such as a brochure, are counted.
  • Form interactions are tracked too.

A scroll only counts once someone has about 90% of the page in view for the first time. The page view is the fixed foundation, which always stays on, according to Google.

You switch the other parts on or off individually, even after you have created the data stream. Unsure about a part? Then leave it on for now and check after a month whether you use it.

One rule weighs heavily. Google asks you to collect zero personally identifiable information through these events, such as a customer's name or email address.

GA4 counts a lot automatically, you decide what matters.

The GA4 reports that count for you

GA4 opens with a long list of reports. For a business owner who wants to see enquiries, four questions are enough. Search the menu for what a report shows, because the names change regularly.

Are visitors coming in right now?

The Realtime overview shows what is happening on your site right now. Use it as a test bench. Send a test enquiry yourself and see if that event shows up straight away.

Where do your visitors come from?

The Traffic acquisition report shows which route visitors take to arrive. Think of Google, an ad, a link on another site or your newsletter. Put your key events next to it and you see which channel also brings customers.

Which pages attract visitors?

The Pages and screens report lists your pages with their views. Look especially at the pages about your services. If they draw plenty of visitors and the enquiries stay away, that is where your first job lies.

A yellow memo note on a printed services page on the kitchen table marks the first job

You can read how to make a page like that stronger in the article on a landing page that converts.

What actions do your visitors take?

The Events overview lists every action GA4 counts. Here you check whether your quote form and your phone click really count. If one is missing, your tracking plan is only half finished.

Engagement in plain English

In GA4 you often come across the word engagement. It means a visitor really does something on your site. A session is one visit, from arrival to departure.

A session counts as an engaged session as soon as it meets one of these conditions.

  • The session lasts longer than 10 seconds.
  • The session includes a key event.
  • The session has 2 or more page or screen views.

The engagement rate is the percentage of engaged sessions. The bounce rate is the opposite of that. So a visitor who leaves one page within a few seconds counts as a bounce.

Looking for these figures in your reports? In most reports they are hidden by default and you add them yourself.

What does a high engagement rate tell you? That visitors stay and look around. It says little about enquiries yet. For that you need key events.

Attention is nice, an enquiry pays the bills.

Key events in GA4

A key event measures an action that is important to the success of your business. In GA4 these actions used to be called conversions. If you read about conversions in older guides, it means the same thing.

Google chose the new name to align the definition of conversions with Google Ads. Do you advertise there? Then you want to see the same actions in your campaigns as in GA4. We include that alignment when we manage your ads, see Outsource Google Ads.

Which events deserve that status? Take the tracking plan from earlier. Here are a few examples from SMEs.

  • A landscape gardener marks the submitted quote form.
  • A law firm marks the submitted contact form.
  • A plumber marks the click on the phone number.
  • An online shop keeps the purchase as a key event.
Plumber from Brabant sticks a gold star on the side of his van

That purchase, the purchase event in GA4, is already marked by Google by default. Keep the rest of the list short. A standard property can mark up to 30 events, an Analytics 360 property 50. For most SME sites, four or five are enough.

How to mark a key event

Marking itself is done in a moment. Google describes the method in the Analytics Help.

  1. Check that the event already exists and is coming into GA4.
  2. In Admin, open the Events section.
  3. Click the star next to the event you want to mark.
  4. Give GA4 up to 24 hours to process the marking.

A marking applies to future reports. Visits from before the star stay outside that count. So set the marking as early as possible.

Is your phone click or quote form not yet listed as a separate event? Then someone creates that event first. After that, the star can be added.

Then test it yourself. Send a test enquiry, click your own phone number and check a day later whether both actions are counted.

Owner of a window cleaning company in Brabant calls his own number to test whether the office phone rings

Mark what brings in money and let the rest simply count along.

Google Analytics 4 and consent

Does your site ask visitors for consent to cookies? Then that choice determines what GA4 gets to see. Consent Mode passes that choice on to Google's tags.

If a visitor declines, the tags send pings to Google instead of storing cookies. A ping is a short signal. GA4 then fills the gaps with conversion and behavioural modelling, an estimate based on the visitors who are counted.

A thumb gives a bicycle bell one quick ring at a closed garden gate

Do you block the tags completely until someone says yes? Then GA4 gives you zero modelled data for visitors who decline. You can read how your banner and Consent Mode work well together on the page for getting a cookie banner built.

A lawyer can explain clearly what is allowed in your situation. We take care of the technical side.

From accurate figures to more enquiries

Once your tracking is set up properly, the fun part begins. You now see which pages attract visitors and which pages bring in enquiries. The difference between the two is your room for growth.

We use accurate GA4 tracking as the starting point for conversion optimisation. That way every change to a page gets a fair yardstick, based on your own key events.

Unsure whether your current tracking is accurate? In a call with Dominic, you go through your key events together. Afterwards you know which figures you can trust and where the first work lies.

Accurate tracking turns every change into a fair test.

Owner of a herb shop in Brabant weighs out spices on an old-fashioned balance

Frequently asked questions about Google Analytics 4 (FAQ)

What is Google Analytics 4?

Google Analytics 4, GA4 for short, is Google's free analytics service. It shows how visitors arrive at your website and what they do there, measured as events. GA4 is the successor to Universal Analytics.

How do I set up GA4?

Create an account and a property in Admin. Add a web data stream with your site's URL and switch on Enhanced measurement. Then place the Google tag on every page and check that your own visit comes in.

What are key events in GA4?

Key events are actions that count towards the success of your business, such as a quote request, a click on your phone number or a purchase. They used to be called conversions. You mark an existing event with the star in Admin under Events.

Which GA4 reports should I look at?

Start with four questions. Are visitors coming in right now, where do they come from, which pages do they view and what actions do they take? Together with your key events, those reports give a clear picture of what your site delivers.

Does GA4 still measure when visitors decline cookies?

With Consent Mode, the tags then send pings instead of storing cookies. GA4 fills the gaps with modelling. If you block the tags completely until someone gives consent, you get zero modelled data for visitors who decline.

How long does GA4 keep my data?

In a free property, you choose 2 or 14 months for user-level data. That choice applies to explorations and funnel reports. Want to compare years with each other? Then choose 14 months.

Conclusion

Google Analytics 4 shows how visitors arrive at your site and what they do there. First set up the basics properly with an account, a web data stream, the Google tag and the right retention period. After that, focus on the reports about traffic sources, pages and events. Mark the actions that bring in customers as key events. Then GA4 measures exactly what moves your business forward.

The next step

How we tackle this together

Discover your biggest growth opportunities with a free opportunity analysis (worth €416) — a tailor-made report, free of charge and with no obligation.

1Analysis
2Action plan
3Proposal
Schedule a call
Dominic Pietersz

About the author

Dominic Pietersz

Your dedicated point of contact

Dominic helps SMEs grow through Google and other channels. With his international experience, he turns challenges into concrete growth.

Follow Dominic on LinkedIn

Inspiration · My receipt from the DIY store was half a metre long, full of item numbers and discount lines. At home I took a highlighter and underlined the three things I had actually come for.